Pax Eos

Exchanges the air and retains the heat.

Pax Eos 100H with preheating function provides an extra benefit when it is cold outside: before the cold air from outside enters the building, it is preheated to at least 18 °C by Eos so that it is close to normal room temperature from the start. This creates a pleasant indoor environment and saves energy. You choose: if you want Eos 100H to automatically run as economically as possible when it’s cold outside, you select the Eco setting. If instead you want an automatically even inflow of pleasant 18 °C air, you switch over to Comfort mode.

More automatic control makes Eos intelligent
All Eos models have a moisture control function that automatically increases the air flow when you take a shower or bath, for example. When the moisture has disappeared, the flow returns to its preselected setting. You’ve probably noticed that winter air is often extremely dry: lips, hands and cuticles need to be moisturised so that they don’t crack and become painful. That’s why we’ve made sure that Pax Eos replenishes moisture in incoming air and makes the indoor climate much more comfortable. When it’s warm outside and the sun heats your house, Eos can be set to summer mode. In this mode, Eos ensures that you ventilate out the warm indoor air so that your indoor climate is as cool as possible.

Simple to install and manage
The unit is approved for installing in wet rooms and can be placed on a wall or in the ceiling. When you switch on your new Eos, it automatically adjusts itself to the conditions in your building. The settings on Eos rarely need adjusting. If an adjustment nonetheless becomes necessary, it can easily be made using the remote control that comes with the unit.

Pax Eos 100 heater
Effect: 3.5-25W

Specifications

1110-2
Designation
Pax Eos 100 heater
Article no.
1110-2
EAN
7391477111027
Colour/Finish
White
Material
ABS plastic
Multi-pole Switch
Yes
Power consumption
3.5-25W
Voltage/Frequency
230V AC 50Hz
IP code
IP24
Insulation class
Class II must not be protectively earthed
Certificate
Intertek S Mark
Labels
CE
Connection
Hidden
Free blowing capacity
30, 52 alt. 78 m3/h (90 m3/h extract air only)
Noise pressure level – at min. rPM
18 dB(A) 3 m
Noise pressure level – at max. rPM
35 dB(A) 3 m
Duct Ø [mm]
100
Placement
Wall or ceiling
Type of motor
EC
Efficiency [%]
75-80
Electrical installation
Note: All permanent electrical installation work must be done by a qualified electrician.
Leakage [%]
5
The heater’s max. power at OA -20°C [W]
<375W
Other information
Remote control included. Filter: Outdoor Air G4/Exhaust Air G4

Accessories
1110-2
The following accessories can be used with this product.
Download